TABLE OF CONTENTS
...
LED COLOR | LED ACTION | MEANING | |
|---|---|---|---|
WHITE | fading-in or out | Module Turns On/Off | |
GREEN | blinking | Module in wireless WAM Mode, attempting to connect with the Digitaize USB Receiver. | |
GREEN | fading | Module in WAM Mode, connected to the Digitaize USB Receiver. | |
BLUE | blinking | Module in Bluetooth Mode, advertising. | |
BLUE | fading | Module in Bluetooth Mode, connected to the Bluetooth host. | |
YELLOW | fading | Module connected BUT not attached to the Sensor Link | |
YELLOW | blinking fast | SOLO mode active on one of the Midi CC controllers | |
PURPLE | fading fast | Module in Calibration Mode | |
PURPLE | blinking | a short purple blink indicates the preset being being recalled, the blink time indicates the preset number | |
RED | blinking | 1 Blink every 2 seconds: battery under 20% charge 1 Blink every 1 second: battery under 10% charge | |
REDDARK PURPLE | blinking | Blinking constantly red means there is a firmware problem. Perform Recovery Mode | Constant orangemodule in a DFU mode |
CONSTANT ORANGE | The battery is charging. This LED will turn off when the battery is fully charged. |
...
NOTE: this is the most important part of the Digitaize Setup. You can repeat it at any moment choosing the option “Calibrate” from the Instrument Setting Window.
It is strongly advised to familiarize yourself with this procedure and to perform it regularly. This is especially important if you observe some major inconsistencies in the midi translation.
Selecting the concert pitch
...